Endpoint Protection

Hi,

I need to know the best practices to upgrade SEPM v 12.1.100 to 12.1.1, also need to know there is any problem id i install cliend with IPS and Sonar features on servers like AD, Exchange.. !!!

Thanks

They can be found here:

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

Both SONAR and IPS supported. If it is a high availability server just make sure to know the limitations.

This article will be helpful:

Best Practices for the Intrusion Prevention System component of Symantec Endpoint Protectoin on high-availability/high bandwidth servers.

Hello,

Check these Articles:

Upgrading or migrating to Symantec Endpoint Protection 12.1.2 (RU2)

http://www.symantec.com/docs/TECH197426

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

http://www.symantec.com/docs/TECH163700

Best Practices for Installing Symantec Endpoint Protection (SEP) on Windows Servers

http://www.symantec.com/business/support/index?pag

Best practices regarding Intrusion Prevention System technology

http://www.symantec.com/docs/TECH95347

You can upgrade in the latest version 12.1 RU2 MP1. All feature supported here

For the same follow below

Upgrading or migrating to Symantec Endpoint Protection 12.1.2 (RU2)

After upgrading in 12.1 RU2 then upgrade in 12.1 RU2 MP1

Upgrading or migrating to Symantec Endpoint Protection 12.1.2100 (RU2 MP1)

After Upgrading the version of SEP Manager in same sequence then upgrade client direct in 12.1 RU2 MP1

Hi,

Agreed with above comments,

Please check with this also.

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

http://www.symantec.com/docs/TECH163700

Upgrade process from SEP 12.1 RU1 MP1 to SEP 12.1 RU2

https://www-secure.symantec.com/connect/articles/upgrade-process-sep-121-ru1-mp1-sep-121-ru2

Hi,

Upgrade process is quite straight forward.

However can refer this article to know more about it.

Upgrade process from SEP 12.1 RU1 MP1 to SEP 12.1 RU2

https://www-secure.symantec.com/connect/articles/upgrade-process-sep-121-ru1-mp1-sep-121-ru2

Before doing an upgrade take a backup.

About SONAR

http://www.symantec.com/business/support/index?page=content&id=HOWTO55254

Managing SONAR

http://www.symantec.com/business/support/index?page=content&id=HOWTO55215

Hello,

If you are planning to upgrade or migrate to Symantec Endpoint Protection 12.1.2, please take a look at the latest how-to article created by our very own SEP content council team.

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

http://www.symantec.com/docs/TECH163700

You may also like to check this Article :

Knowledgebase Articles for Symantec Endpoint Protection 12.1. RU2

Hope that helps!!

Hi

Please follow the link below

http://www.symantec.com/business/support/index?page=content&id=TECH163700&actp=search&viewlocale=en_US&searchid=1366716021144

Regards

Hi,

We are upgrading SEPM and 3000+ clients from 12.1 RU1 MP1 to 12.1 RU2 MP1 .

I have read all the release notes for both RU2, and RU2-MP1.

We plan to upgrade the SEPM first, then clients.

Could someone who has done this before, please confirm my following understanding?

1. SEPM must be upgraded to 12.1 RU2, then upgraded to 12.1 RU2 MP1?

2. Clients must be upgraded to 12.1 RU2, then upgraded to 12.1 RU2 MP1? (resulting in two reboots)?

Thanks.

Rama

Yes, that is the correct and recommended way according to best practice.

Hi

Please follow the below link

http://www.symantec.com/docs/TECH163700

Regards