Endpoint Protection

 View Only
  • 1.  How discover the client computers that don't have SEP

    Posted Jul 26, 2013 05:00 AM

    Hi All,

    I search a way to discover all the client computers in my network that don't have SEP installed. Someone can advice me in order to push the SEP Client remotely ?

    Regards.



  • 2.  RE: How discover the client computers that don't have SEP

    Posted Jul 26, 2013 05:03 AM

    Hi,

    You can use unmanaged Detector

    Unmanaged Detector in SEP 12.1

    https://www-secure.symantec.com/connect/articles/unmanaged-detector-sep-121

    SEP 12.1 - What does it mean to set a client as an Unmanaged Detector?

     

    Article:TECH183746 | Created: 2012-03-14 | Updated: 2012-08-26 | Article URL http://www.symantec.com/docs/TECH183746

    #

    Configuring a client to detect unknown devices

     

    Article:HOWTO27421 | Created: 2010-01-08 | Updated: 2010-01-20 | Article URL http://www.symantec.com/docs/HOWTO27421

     



  • 3.  RE: How discover the client computers that don't have SEP

    Trusted Advisor
    Posted Jul 26, 2013 05:08 AM

    Hello,

    The new version is called the Client Deployment Wizard.

    You can find it in two places - first from the Home screen, choose "Install Protection Client to Computers" from the "Common Tasks" drop down at the top right, or alternatively, from the Clients tab, when you are in the client list, click "Add a Client" on the left hand side, just above "Add computer account"

    Check these Threads:

    https://www-secure.symantec.com/connect/forums/symantec-endpoint-protection-121-and-find-unmanaged-computers

    https://www-secure.symantec.com/connect/forums/where-did-find-unmanaged-computers-go-121

    As suggested in the Above Threads, you could us the "UnManaged Detector" as an option.

    Upon booting, a computer sends out Address Resolution Protocol (ARP) traffic to identify itself on a network. Once enabled, the Unmanaged Detector listens for gratuitous ARP traffic and collects Internet Protocol (IP) and Machine Address (MAC) data from traffic passing it on the local network. This data is then forwarded to the Unmanaged Detector’s SEPM which compares the IP address and MAC address of detected systems against its known list of managed endpoint clients and reports on the unmanaged endpoint clients.

    An unmanaged detector is configured by right-clicking a managed SEP client in the Clients page of the SEPM console, and selecting "Make unmanaged detector".

    Best Practices: When to use the "Find Unmanaged Computers" or "Unmanaged Detector" features in Symantec Endpoint Protection 11.0

    http://www.symantec.com/docs/TECH104340

    What does it mean to set a client as an Unmanaged Detector?

    http://www.symantec.com/docs/TECH105722

    Hope that helps!!


  • 4.  RE: How discover the client computers that don't have SEP

    Posted Jul 26, 2013 07:33 AM

    "Thumbs up" to Mithun on using the Client Deployment Wizard. You can search a subnet for clients without SEP and install from the SEPM.

    Here is an article I wrote on it:

    https://www-secure.symantec.com/connect/articles/client-deployment-wizard-sep-121



  • 5.  RE: How discover the client computers that don't have SEP

    Posted Jul 29, 2013 02:20 AM

    Hi,

    Thumbs up for Mithun's answer.

    You can find the clients which does not having SEP protection.

    Regards

    Ajin

     



  • 6.  RE: How discover the client computers that don't have SEP

    Posted Oct 21, 2013 04:13 PM

    Charry,

    Have you gotten this resolved?



  • 7.  RE: How discover the client computers that don't have SEP

    Posted Oct 22, 2013 01:02 AM

    Hi

    Please refer the link below

    http://www.symantec.com/business/support/index?page=content&id=TECH102907&actp=search&viewlocale=en_US&searchid=1382417462093

    Regards