Endpoint Protection

So far, every single time I try to login to my computer, the loading screen takes about 20 seconds or so then it crashes and reboots. I am aware of it being a BSOD 0x00000050 error SRTSPL64.SYS. I know this involves with Symantec Endpoint Protection. The only security programs that I have are MSE, AVG trial/tracker, Malwarebytes, McAfee Security Scan Plus, and TDSSKiller. What should be my solution to stop having my computer rebooting every 20 seconds when I log in normally? I'm using Safe Mode with Networking right now.

What version of SEP are you running? What components do you have installed? Is this managed or unmanaged?

It's not recommended to run two AVs on the same system. Should pick one or the other.

Malwarebytes is fine because its a second opinion scanner, same with McAfeee and TDSSKiller.

 

I have SEP 11.0.5002.333. There's only 1 AVG.

That's a pretty old version, which was buggy. I would suggest an upgrade. Latest for 11.x is RU7 MP2

Or you can go to SEP 12.1.

What OS are you on?

As Brian said you can migrate to 12.1 or 11.0.7 MP2 which is the latest version............

As suggest above you can Upgrade your SEPM.

Which OS version are you using ?

enable the full dump and if the issue still exist open a support ticket after upgrade.

 

Hello,

On what OS are you receiving BSOD?

"I know this involves with Symantec Endpoint Protection. The only security programs that I have are MSE, AVG trial/tracker, Malwarebytes, McAfee Security Scan Plus, and TDSSKiller. "

Any Particular Reason to have so many Antivirus Programs installed on a single machine?

I would not recommend you installing more than 1 Antivirus on the Machine.

 

I would also request a quick check on this Article:

In cases of BSOD, you would have to collect the Full Memory Dump files and create a Case OR contact Symantec Technical Support.

How to create a new case in MySymantec (formerly MySupport)

http://www.symantec.com/docs/TECH58873

How to update a support case and upload diagnostic files with MySupport

http://www.symantec.com/docs/TECH71023

OR

Regional Support Telephone Numbers:

United States: https://support.broadcom.com (407-357-7600 from outside the United States)

Australia: 1300 365510 (+61 2 8220 7111 from outside Australia)

United Kingdom: +44 (0) 870 606 6000

Additional contact numbers: http://www.symantec.com/business/support/contact_techsupp_static.jsp

Hope that helps!!

I am having this very same problem - except that I have a Win7 64 bit OS. Most of the solutions here seem like they're for Vista.

I had to disable my SEP in order to get in to my computer at all, without the startup/shutdown loop happening! Should I uninstall SEP then re-install?

HI,

Can you provide sep version ?

If you don't mind can you raised another thread ....

What version of SEP are you running?

I'm running 12.01 on a Win7 OS.  I've never had a problem until now.

I'm running 12.01. Looks like I downloaded the files on 5/13/11.  Perhaps it's time for an upgrade?

Sorry, I'm unfamiliar with this process -- don't know how to start another thread!

Latest version is 12.1.2:

Best practices for upgrading to Symantec Endpoint Protection 12.1.2

Article:TECH163700

|

Created: 2011-06-30

|

Updated: 2013-01-02

|

Article URL http://www.symantec.com/docs/TECH163700

 

Check here on how to obtain the upgrade:

https://www-secure.symantec.com/connect/forums/latest-symantec-endpoint-protection-released-sep-121-ru2-and-sep-110-ru7-mp3

HI,

Are you want to upgrade sepm ?

SEP 12.1 RU2 Installation and Upgrade Process

Public KB’s

Symantec™ Endpoint Protection 12.1.2 Getting Started Guide

http://www.symantec.com/docs/DOC4322

Upgrade process from SEP 12.1 RU1 MP1 to SEP 12.1 RU2

https://www-secure.symantec.com/connect/articles/upgrade-process-sep-121-ru1-mp1-sep-121-ru2